Universal Joint
Manufacturer’s Warranty : limited lifetime (excluding racing, off-road, or fleet vehicles)
Easy Return : We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Fast Shipping : We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
SKU | MO497 |
---|---|
Brand | Moog® |
Part Name | Universal Joint |
Part | # 497 |
UPC | # 00080066609140 |
Quantity Per Vehicle | 1 |
Pack of | 1 |
Condition | New |
Universal Joint
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industrys Problem Solver.
Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
Needle bearings and snap rings from an original equipment supplier
Nitrile rubber grease seals have compressed double lip design for protection from contaminants
Durable and strong with consistent heat treatment for good bearing hardness ratios
Bearing cups ground and slightly oversized to fit in a used drive shaft
Cross forging shape and flash provide easier installation and high strength
MOOG Product Bulletin - Premium U-Joints
Length Measurement A | - | Outside of bearing to outside of bearing |
---|---|---|
Lube Fitting Location | - | Regular lube fitting in bearing |
Bearing Type B | - | Round grooved |
Bearing Type A | - | Round plain |
Image | - | Ujoint_2grooved_2plain.tif |
Lubricateable | - | Yes |
U-Joint Identification | - | 2 grooved and 2 plain round bearings |
OE Series | - | Combination 513 x 369 |
Length Measurement B | - | Inside of groove to inside of groove plus thickness of 2 lock rings |
Length Axis 1 (IN) | - | 3.22 |
Length Axis 1 (MM) | - | 81.7 |
Length Axis 2 (IN) | - | 2.125 |
Length Axis 2 (MM) | - | 54.0 |
Bearing Cap Type | - | 2 grooved and 2 plain round bearings |
Greaseable | - | Yes |
Bearing Cap Axis 2 Diameter (IN) | - | 1.125 |
Bearing Cap Axis 2 Diameter (MM) | - | 28.6 |
Bearing Cap Axis 1 Diameter (IN) | - | 1.063 |
Bearing Cap Axis 1 Diameter (MM) | - | 27.0 |
Bearing Diameter A - Inch | - | 1.063 |
Bearing Diameter B - Inch | - | 1.125 |
Length B - Inch | - | 2.125 |
Bearing Diameter A - mm | - | 27.0 |
Bearing Diameter B - mm | - | 28.6 |
Length A - Inch | - | 3.22 |
Length B - mm | - | 54.0 |
Length A - mm | - | 81.7 |
Show All |
Ford Bronco 69-66; Jeep Gladiator 69-68; J-100 69-68; J-2600 69-68; J-2700 69-68; J-2800 68; J-3500 69-68; J-3600 69-68; J-3700 69-68; J-3800 69-68; Wagoneer 69-68