LuK DMF Manu
Manufacturer’s Warranty : 12 months/12,000 miles
Easy Return : We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Fast Shipping : We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
$246.94 $268.41
8% Off
Only 4 left in stock - order soon.
SKU | LKDMF045 |
---|---|
Brand | LUK® |
Part Name | Clutch Flywheel |
Part | # DMF045 |
UPC | # 00670774085796 |
Quantity Per Vehicle | 1 |
Pack of | 1 |
Condition | New |
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
Dowel Hole Pattern | - | 5 |
---|---|---|
Bolt hole PCD clutch pres.plte (inch) | - | 10.1575 |
Bolt hole PCD clutch pres.plte (mm) | - | 258 |
Flywheel Thickness [mm] (inch) | - | 2.5472 |
Flywheel Thickness [mm] (mm) | - | 64.7 |
Crank Hole Dia. (inch) | - | 0.4134 |
Crank Hole Dia. (mm) | - | 10.5 |
Crank To Friction Surface (inch) | - | 1.6339 |
Crank To Friction Surface (mm) | - | 41.5 |
Flywheel friction surface outer diameter (inch) | - | 9.4488 |
Flywheel friction surface outer diameter (mm) | - | 240 |
Ring Gear Number | - | L-09180-0048-01 |
Cup depth, secondary flywheel (inch) | - | -0.1299 |
Cup depth, secondary flywheel (mm) | - | -3.3 |
Ring Gear To Friction Surface (inch) | - | 0.7559 |
Ring Gear To Friction Surface (mm) | - | 19.2 |
Torque Capacity DMFW (inch) | - | 14.1732 |
Torque Capacity DMFW (mm) | - | 360 |
I.D. for Pilot (inch) | - | 1.0866 |
I.D. for Pilot (mm) | - | 27.6 |
Bolt hole PCD crankshaft (inch) | - | 2.5984 |
Bolt hole PCD crankshaft (mm) | - | 66 |
Overall Casting O.D. (inch) | - | 11.3386 |
Overall Casting O.D. (mm) | - | 288 |
Has Dowel Pins | - | With dowel pins |
Flywheel Friction Surface Inner diameter (inch) | - | 6.1024 |
Flywheel Friction Surface Inner diameter (mm) | - | 155 |
Centering diameter / dowel hole (inch) | - | 10.315 |
Centering diameter / dowel hole (mm) | - | 262 |
Dowel hole diameter (inch) | - | 0.1969 |
Dowel hole diameter (mm) | - | 5 |
Number of teeth, starter ring gear | - | 135 |
Bolt Hole Pattern | - | 2 |
Show All |