LuK DMF Manu
Manufacturer’s Warranty : 12 months/12,000 miles
Easy Return : We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Fast Shipping : We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
$288.37 $313.45
8% Off
Only 8 left in stock - order soon.
SKU | LKDMF072 |
---|---|
Brand | LUK® |
Part Name | Clutch Flywheel |
Part | # DMF072 |
UPC | # 00670774181948 |
Quantity Per Vehicle | 1 |
Pack of | 1 |
Condition | New |
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
Ring Gear Thickness (inch) | - | 0.3937 |
---|---|---|
Ring Gear Thickness (mm) | - | 10 |
Bolt hole PCD clutch pres.plte (inch) | - | 9.4528 |
Bolt hole PCD clutch pres.plte (mm) | - | 240.1 |
Crank To Friction Surface (inch) | - | 0.9488 |
Crank To Friction Surface (mm) | - | 24.1 |
Overall Casting O.D. (inch) | - | 11.0866 |
Overall Casting O.D. (mm) | - | 281.6 |
Torque Capacity DMFW (inch) | - | 14.4094 |
Torque Capacity DMFW (mm) | - | 366 |
Crank Hole Dia. (inch) | - | 0.4134 |
Crank Hole Dia. (mm) | - | 10.5 |
Number of teeth, starter ring gear | - | 132 |
Ring Gear Mounting O.D. (inch) | - | 10.1516 |
Ring Gear Mounting O.D. (mm) | - | 257.85 |
Flywheel Friction Surface Inner diameter (inch) | - | 5.2362 |
Flywheel Friction Surface Inner diameter (mm) | - | 133 |
I.D. for Pilot (inch) | - | 1.2598 |
I.D. for Pilot (mm) | - | 32 |
Ring Gear To Friction Surface (inch) | - | 0.0492 |
Ring Gear To Friction Surface (mm) | - | 1.25 |
Flywheel friction surface outer diameter (inch) | - | 9.0866 |
Flywheel friction surface outer diameter (mm) | - | 230.8 |
Centering diameter / dowel hole (inch) | - | 9.4528 |
Centering diameter / dowel hole (mm) | - | 240.1 |
Cup depth, secondary flywheel (inch) | - | -0.689 |
Cup depth, secondary flywheel (mm) | - | -17.5 |
Bolt hole PCD crankshaft (inch) | - | 2.5984 |
Bolt hole PCD crankshaft (mm) | - | 66 |
Ring Gear Number | - | L-09180-0165-06 |
Ring Gear Major Dia. (inch) | - | 11.1392 |
Ring Gear Major Dia. (mm) | - | 282.935 |
Dowel Hole Pattern | - | 5 |
Dowel hole diameter (inch) | - | 0.1969 |
Dowel hole diameter (mm) | - | 5 |
Flywheel Thickness [mm] (inch) | - | 2.587 |
Flywheel Thickness [mm] (mm) | - | 65.71 |
Show All |