LuK DMF Manu
Manufacturer’s Warranty : 12 months/12,000 miles
Easy Return : We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Fast Shipping : We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
$758.53 $815.62
7% Off
Only 3 left in stock - order soon.
SKU | LKDMF135 |
---|---|
Brand | LUK® |
Part Name | Clutch Flywheel |
Part | # DMF135 |
UPC | # 00670774257728 |
Quantity Per Vehicle | 1 |
Pack of | 1 |
Condition | New |
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
Ring Gear Mounting O.D. (inch) | - | 10.1161 |
---|---|---|
Ring Gear Mounting O.D. (mm) | - | 256.95 |
Flywheel friction surface outer diameter (inch) | - | 9.3307 |
Flywheel friction surface outer diameter (mm) | - | 237 |
Ring Gear To Friction Surface (inch) | - | 1.7087 |
Ring Gear To Friction Surface (mm) | - | 43.4 |
Bolt hole PCD crankshaft (inch) | - | 2.6772 |
Bolt hole PCD crankshaft (mm) | - | 68 |
Overall Casting O.D. (inch) | - | 11.5512 |
Overall Casting O.D. (mm) | - | 293.4 |
Torque Capacity DMFW (inch) | - | 19.8504 |
Torque Capacity DMFW (mm) | - | 504.2 |
I.D. for Pilot (inch) | - | 0.9055 |
I.D. for Pilot (mm) | - | 23 |
Number of teeth, starter ring gear | - | 135 |
Cup depth, secondary flywheel (inch) | - | -0.3661 |
Cup depth, secondary flywheel (mm) | - | -9.3 |
Dowel Hole Pattern | - | 5 |
Ring Gear Thickness (inch) | - | 0.3937 |
Ring Gear Thickness (mm) | - | 10 |
Flywheel Thickness [mm] (inch) | - | 2.7756 |
Flywheel Thickness [mm] (mm) | - | 70.5 |
Flywheel Friction Surface Inner diameter (inch) | - | 7.0079 |
Flywheel Friction Surface Inner diameter (mm) | - | 178 |
Crank To Friction Surface (inch) | - | 1.937 |
Crank To Friction Surface (mm) | - | 49.2 |
Crank Hole Dia. (inch) | - | 0.4232 |
Crank Hole Dia. (mm) | - | 10.75 |
Dowel hole diameter (inch) | - | 0.2362 |
Dowel hole diameter (mm) | - | 6 |
Centering diameter / dowel hole (inch) | - | 10.1575 |
Centering diameter / dowel hole (mm) | - | 258 |
Bolt Hole Pattern | - | 2 |
Bolt hole PCD clutch pres.plte (inch) | - | 10.1575 |
Bolt hole PCD clutch pres.plte (mm) | - | 258 |
Ring Gear Major Dia. (inch) | - | 11.3924 |
Ring Gear Major Dia. (mm) | - | 289.366 |
Show All |