LuK DMF Manu
Manufacturer’s Warranty : 12 months/12,000 miles
Easy Return : We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Fast Shipping : We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
$573.99 $617.19
7% Off
Only 8 left in stock - order soon.
SKU | LKDMF153 |
---|---|
Brand | LUK® |
Part Name | Clutch Flywheel |
Part | # DMF153 |
UPC | # 00670774262340 |
Quantity Per Vehicle | 1 |
Pack of | 1 |
Condition | New |
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
Ring Gear Major Dia. (inch) | - | 11.0002 |
---|---|---|
Ring Gear Major Dia. (mm) | - | 279.404 |
Ring Gear Mounting O.D. (inch) | - | 9.9843 |
Ring Gear Mounting O.D. (mm) | - | 253.6 |
Torque Capacity DMFW (inch) | - | 29.5276 |
Torque Capacity DMFW (mm) | - | 750 |
Number of teeth, starter ring gear | - | 132 |
I.D. for Pilot (inch) | - | 1.9626 |
I.D. for Pilot (mm) | - | 49.85 |
Ring Gear Number | - | L-01180-0033-02 |
Bolt hole PCD crankshaft (inch) | - | 2.7559 |
Bolt hole PCD crankshaft (mm) | - | 70 |
Overall Casting O.D. (inch) | - | 11.0394 |
Overall Casting O.D. (mm) | - | 280.4 |
Ring Gear Thickness (inch) | - | 0.3937 |
Ring Gear Thickness (mm) | - | 10 |
Flywheel Thickness [mm] (inch) | - | 2.4803 |
Flywheel Thickness [mm] (mm) | - | 63 |
Flywheel friction surface outer diameter (inch) | - | 9.4882 |
Flywheel friction surface outer diameter (mm) | - | 241 |
Bolt hole PCD clutch pres.plte (inch) | - | 10 |
Bolt hole PCD clutch pres.plte (mm) | - | 254 |
Crank To Friction Surface (inch) | - | 2.3819 |
Crank To Friction Surface (mm) | - | 60.5 |
Ring Gear To Friction Surface (inch) | - | 1.811 |
Ring Gear To Friction Surface (mm) | - | 46 |
Bolt Hole Pattern | - | 21 |
Cup depth, secondary flywheel (inch) | - | -0.0984 |
Cup depth, secondary flywheel (mm) | - | -2.5 |
Flywheel Friction Surface Inner diameter (inch) | - | 6.2992 |
Flywheel Friction Surface Inner diameter (mm) | - | 160 |
Crank Hole Dia. (inch) | - | 0.4173 |
Crank Hole Dia. (mm) | - | 10.6 |
Show All |