Denso 10PA17C Compressor
Manufacturer’s Warranty : 24 Months/24,000 Miles
Easy Return : We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Fast Shipping : We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
SKU | FS78358 |
---|---|
Brand | Four Seasons® |
Part Name | A/C Compressor |
Part | # 78358 |
UPC | # 00096361783584 |
Quantity Per Vehicle | 1 |
Pack of | 1 |
Condition | New |
Manufactured Compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
Manufactured Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
Denso 10PA17C Compressor
Manufactured Compressors meet or exceed OE specifications
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
Manufactured Compressors are individually vacuum,pressure, and Helium Mass Spectrometer tested to ensure no leaks
Manufactured Compressors are validated for the equivalent of 100,000 miles
Belt Type | - | V-belt |
---|---|---|
Belt Width IN (in) | - | 0.500 |
Belt Width MM (mm) | - | 12.7 |
California Proposition 65 | - | Warning: this product contains a chemical known to the state of california to cause cancer and birth defects or other reproductive harm. |
Clutch Included | - | Included |
Coil Clock | - | 1 wire lead |
Coil Voltage (2H) | - | 12 |
Connector Type | - | Pin |
Discharge Port Type | - | Pad mount |
Electronic Control Valve | - | No |
Groove | - | 1 |
Model | - | 10pa17c |
Mount Distance IN (in) | - | 1.7 |
Mount Distance MM (mm) | - | 43.18 |
Mount Type | - | Tangent mount |
New or Reman | - | New |
O-Ring A Number/Desc | - | 24156 / compressor manifold port gasket |
O-Ring A Quantity | - | 1 |
O-Ring B Number/Desc | - | N/a |
O-Ring B Quantity | - | N/a |
O-Ring C Number/Desc | - | N/a |
O-Ring C Quantity | - | N/a |
Oil Type | - | Pag 46 |
Part Note | - | May require use of oe manifold |
Pulley Diameter IN (in) | - | 5.625 |
Pulley Diameter MM (mm) | - | 142.75 |
Refrigerant Type | - | R134a |
Suction Port Type | - | Pad mount |
Switch Type | - | N/a |
Type | - | Nippondenso |
Show All |