LuK DMF Manu
Manufacturer’s Warranty : 12 months/12,000 miles
Easy Return : We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Fast Shipping : We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
$317.47 $345.08
8% Off
Only 27 left in stock - order soon.
SKU | LKDMF123 |
---|---|
Brand | LUK® |
Part Name | Clutch Flywheel |
Part | # DMF123 |
UPC | # 00670774250804 |
Quantity Per Vehicle | 1 |
Pack of | 1 |
Condition | New |
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
Cup depth, secondary flywheel (inch) | - | -0.315 |
---|---|---|
Cup depth, secondary flywheel (mm) | - | -8 |
Ring Gear To Friction Surface (inch) | - | 0.6299 |
Ring Gear To Friction Surface (mm) | - | 16 |
Crank To Friction Surface (inch) | - | 1.5827 |
Crank To Friction Surface (mm) | - | 40.2 |
Ring Gear Thickness (inch) | - | 0.5906 |
Ring Gear Thickness (mm) | - | 15 |
Dowel Hole Pattern | - | 5 |
I.D. for Pilot (inch) | - | 1.2598 |
I.D. for Pilot (mm) | - | 32 |
Number of teeth, starter ring gear | - | 135 |
Ring Gear Number | - | L-08180-0g99-06 |
Overall Casting O.D. (inch) | - | 11.3386 |
Overall Casting O.D. (mm) | - | 288 |
Dowel hole diameter (inch) | - | 0.1969 |
Dowel hole diameter (mm) | - | 5 |
Bolt hole PCD crankshaft (inch) | - | 2.5984 |
Bolt hole PCD crankshaft (mm) | - | 66 |
Bolt hole PCD clutch pres.plte (inch) | - | 10.1575 |
Bolt hole PCD clutch pres.plte (mm) | - | 258 |
Flywheel friction surface outer diameter (inch) | - | 9.4488 |
Flywheel friction surface outer diameter (mm) | - | 240 |
Torque Capacity DMFW (inch) | - | 15.9213 |
Torque Capacity DMFW (mm) | - | 404.4 |
Flywheel Thickness [mm] (inch) | - | 2.8898 |
Flywheel Thickness [mm] (mm) | - | 73.4 |
Bolt Hole Pattern | - | 2 |
Ring Gear Mounting O.D. (inch) | - | 10.2205 |
Ring Gear Mounting O.D. (mm) | - | 259.6 |
Flywheel Friction Surface Inner diameter (inch) | - | 6.1024 |
Flywheel Friction Surface Inner diameter (mm) | - | 155 |
Crank Hole Dia. (inch) | - | 0.4016 |
Crank Hole Dia. (mm) | - | 10.2 |
Centering diameter / dowel hole (inch) | - | 10.315 |
Centering diameter / dowel hole (mm) | - | 262 |
Ring Gear Major Dia. (inch) | - | 11.3924 |
Ring Gear Major Dia. (mm) | - | 289.366 |
Show All |